6 min readSourcing & Logistics

How to Read a Stainless Steel Quote

A stainless quotation is more than a total price. Learn how grade, thickness, finish, labour and packing appear line by line and compare supplier offers fairly.

How to Read a Stainless Steel Quote

The material line: grade, thickness and yield

The first line of a stainless quotation usually describes the base material, and this is where large price differences hide. Grade 201 is cheaper than 304, while 316 carries a premium because of its molybdenum content and better chloride resistance. Thickness is often quoted as a nominal gauge, but suppliers buy sheet by actual mill thickness and tolerances inside the coil can change the real cost. Ask whether the price is calculated per sheet, per kilogram or per finished part, and confirm the density used for conversion, typically around 7.93 g per cubic centimetre for 304 and 8.0 for 316. Yield also matters: a layout that nests parts inefficiently may waste thirty percent of a sheet, and that waste is built into the unit price. A transparent quotation states the assumed sheet size and nesting efficiency so a buyer can judge fairness.

Fabrication lines: cutting, bending and welding

Fabrication charges are where two quotations for the same drawing can differ most. Laser cutting is usually priced per metre of cut or per machine hour, so a design with many small holes costs more than a simple outline even when the material weight is identical. Waterjet cutting avoids heat distortion on thick plate but runs slower and adds a different rate. Bending is often charged per bend, which makes the number of forming steps easy to compare across suppliers. Welding may be quoted per metre of seam, and the rate should reflect whether the joint is visible and needs grinding or blending afterwards. Polishing labour is another variable: a brushed finish passes quickly, while a mirror finish on complex geometry takes several stages of abrasive work. Ask for the expected hours or piece rates on each operation rather than a single fabrication subtotal, because that detail reveals whether the workshop has understood your drawing.

Finish, coating and packing lines

Finish and coating lines are often the source of the largest misunderstanding. A 2B mill finish, a BA bright annealed surface, a brushed direction and a mirror polish are not interchangeable, and each carries a different price and lead time. PVD titanium coating is usually charged per square metre of coated area, and the quotation should state whether both faces are included. Confirm the colour reference, because the same code name can look different under warm retail lighting. Protective film, laser cutting film and edge sealing may appear as separate small charges and are worth keeping, particularly for mirror and coloured sheets. Packing is another line that should never be assumed: export wooden crates, desiccant, corner guards and container loading all add cost but prevent damage at sea. Check whether the quoted price is ex-works, free on board or delivered, and whether tax and duty are included.

Comparing offers without chasing the lowest number

Once every quotation is broken into the same lines, the cheapest offer is not always the best value. A lower material line may mean grade 201 substituted for 304, which performs poorly in humid or coastal environments. A low fabrication subtotal may hide hand polishing that will vary from batch to batch. Ask for the reference standard of the sheet, the expected packing method and the commercial terms in writing. Our team can walk through a quotation with you and explain which lines are fixed and which depend on your drawing. Send your specification through WhatsApp at +86 17324671020 or email chen847415774@gmail.com and you will receive a structured reply within 24 working hours. Treat the quotation as a technical document rather than a number, and the comparison becomes a decision about quality, not just cost.

Factory and project images are AI-generated illustrations, not photographs of a real facility or completed project.

Back to all guides

Have a drawing ready?

Send it on WhatsApp or by email. Get grade, finish, MOQ and lead time back within 24 working hours.

Ask on WhatsApp (Opens in a new window)Get a Quote