7 min readApplications

What to Specify in a Display Cabinet

A stainless display cabinet succeeds or fails in the specification. Cover grade, finish, glass, lighting, hardware and drawings before you request a quote.

What to Specify in a Display Cabinet

Define the use and the envelope

Before choosing materials, describe exactly what the cabinet must do. Will it hold jewellery under spotlights, wine bottles on shelves, watches in a locked case, or merchandise in an open retail unit? The answer determines the internal layout, shelf loads, security level and glass specification. Next, fix the envelope: overall width, depth and height, plus the available floor space and ceiling height on site. A common retail cabinet might be 900 mm wide, 450 mm deep and 1800 mm high, but custom sizes are normal for fitted interiors. Note any constraints such as door swings, power outlets for lighting and proximity to air-conditioning vents. Decide whether the cabinet is freestanding, wall-mounted or built into a run of joinery, because that changes the frame construction and which faces need finishing. A short written brief with a sketch saves several rounds of quotation revisions and makes the final drawing far more accurate.

Grade, finish and glass

For most indoor cabinets, 304 stainless steel is the right base grade; choose 316 only for humid or coastal locations. The frame and visible metal are usually 1.0 to 2.0 mm thick, with thicker sections where shelves carry weight. Specify the finish clearly: brushed 304 hides fingerprints on high-touch doors, while a PVD gold or black frame creates a luxury look for jewellery and fashion retail. If the design mixes finishes, say which surfaces are brushed and which are mirror so the fabricator can align the grain. Glass is the next decision. Tempered glass is standard for safety, typically 6 to 12 mm depending on panel size, and low-iron glass gives a clearer, greener-free view of the contents. Decide on shelf glass thickness separately from the doors. Note the glazing method, whether framed, frameless or with silicone joints, and confirm the door style: hinged, sliding or lift-up. Each choice affects both cost and the hardware list, so settle them before requesting a price rather than after.

Lighting, hardware and security

Lighting changes how the merchandise reads, so specify it rather than leaving it to chance. LED strip lights along shelf edges or vertical pillars are common, with a colour temperature around 3000 K for jewellery and 4000 K for watches or general retail. Decide where the driver sits and how power enters the cabinet, and ask for a service access panel so a failed strip can be replaced without dismantling the case. Hardware details deserve equal attention: hinge type, soft-close or standard, handle style, lock type and number of keys. For jewellery and watches, a locked glass door with a quality cam lock and discreet hinges is standard. Add anti-tip fixings for tall cabinets and consider ventilation if the contents or lighting generate heat. If the cabinet holds wine, specify a stable shelf pitch and vibration control. Put every chosen component into the written specification with a brand or an approved equivalent, so the quotation is comparable between suppliers and the delivered cabinet matches the showroom sample.

Drawings, quantities and next steps

The fastest route from idea to quotation is a clean drawing. Send a front elevation, a plan and a side view with dimensions, plus a simple note of the grade, finish, glass and lighting you chose. If you already have a designer's file, a vector or CAD drawing is even better because it removes guesswork about radii and joint details. State the quantity and whether units are identical or vary in size, since that affects nesting, MOQ and the unit price. Ask the supplier to confirm the glass spec, the finish sample reference, the expected lead time and how the cabinets will be packed for freight. For retail chains rolling out multiple stores, agree on a master sample first and keep it as the acceptance standard. We make display cabinets, screens, colored sheets and other fitted metalwork to your drawings and reply within 24 working hours. Send your dimensions and sketches on WhatsApp at +86 17324671020 or by email at chen847415774@gmail.com for a written quotation and specification review.

Factory and project images are AI-generated illustrations, not photographs of a real facility or completed project.

Back to all guides

Have a drawing ready?

Send it on WhatsApp or by email. Get grade, finish, MOQ and lead time back within 24 working hours.

Ask on WhatsApp (Opens in a new window)Get a Quote